38319
€131,25
Antique Brass 39028
Our expected restock date is: 2/4/2025
Antique Brass 39028
Our expected restock date is: 2/4/2025
We’ve engineered this single 2x toggle switch to be as sleek as possible.
The antique brass-finished front plate is just 1.5mm thick and sits flush to the wall. It attaches to the back plate using clips for a screwless look.
Use a two-way switch where you want to simply turn a circuit on and off. You can have up to two of these on one circuit. To control the circuit from three or more places, add an intermediate switch.
Antique brass is what’s called a ‘living’ finish because it reacts to the air and moisture around it, causing it to darken (especially in the areas you touch most). We’ve given it a head start by ageing it by hand, so it has that antique look right out the box.
How do I install Corston electrical products? + -
How do I install Corston Clear Switches and Sockets? + -
Do I need to use Corston back boxes for your electrical products? + -
Can I create a custom switch arrangement? + -
How do your retractive switches work? + -
When should I use an intermediate switch? + -
Can I have more than one two-way dimmer controlling the same circuit? + -
How do I stop my dimmers from flickering? + -
Are your products suitable for use outside of the UK? + -
Bespoke options
Our expected restock date is: 2/4/2025
How do I install Corston electrical products? + -
How do I install Corston Clear Switches and Sockets? + -
Do I need to use Corston back boxes for your electrical products? + -
Can I create a custom switch arrangement? + -
How do your retractive switches work? + -
When should I use an intermediate switch? + -
Can I have more than one two-way dimmer controlling the same circuit? + -
How do I stop my dimmers from flickering? + -
Are your products suitable for use outside of the UK? + -
Planning on installing our switches and sockets? You’ll need our back boxes too.
You can only get the flush look with our back boxes. We’ve designed them so the chassis on the switch or socket sits within the box, allowing the front plate to fit up nice and snug to the wall. Something that other back boxes just won’t do.
You’ll need our back box and 3mm plaster trim to get a flush look on skimmed plasterboard. You’ll also need to watch the fitting instructions before installing.
Watch the videoYou’ll need our back box and 9mm render trim to get a flush look on a brick wall. You’ll also need to watch the fitting instructions before installing.
Watch the videoYou’ll need our back box but no trim to get a flush look on unskimmed plasterboard. You’ll also need to watch the fitting instructions before installing.
Watch the video